3M™ Edge Sealer 3950 – Edge Stabilizer Primer | 236 ml (8 fl oz)
Product Description
3M™ Edge Sealer 3950 is a specialty sealer developed to protect the edges of vinyl film, foil, and graphic applications. It extends the life of graphics by preventing edge lifting and enhances their resistance to environmental influences. It is used in outdoor advertising, vehicle wrapping, signage, and similar applications.
It is especially preferred to prevent peeling of foil edges in areas affected by wind, water, humidity, and chemicals. It is fully compatible with 3M graphic films.
Technical Information
Product Name: 3M™ Edge Sealer 3950
Capacity: 236 ml (8 fl oz)
Application Method: There is a brush head under the metal cover.
Area of Use: Foil, vinyl film, graphic applications
Drying Time: 15-30 minutes surface drying, 24 hours full cure
Color: Transparent
Compatibility: All 3M graphic films and industrial vinyl foils
Packaging: Metal tin can
Application Areas
Car wrap edge fixing
Outdoor direction and signage systems
Window graphics and display applications
Advertising foil edge protection
For long-lasting results in graphic coatings
Instructions for Use
Make sure the surface is dry, clean and dust free.
It is applied as a thin layer to the edge areas using the brush on the inner cover of the metal box.
Applying a single layer along the edge is sufficient; a thick layer is not recommended.
After application, the product cap should be closed tightly.
Warnings and Safety
Highly flammable. Keep away from sources of fire and sparks.
Avoid breathing vapors, application should be done in well-ventilated areas.
In case of skin contact, wash with plenty of water.
In case of eye contact, seek medical attention immediately.
Keep out of reach of children.
Advantages
Prevents edge lifts
Extends foil life
Quick and easy application
It does not cause aesthetic deterioration with its transparent structure.
Provides extra protection against external factors
Fully compatible with 3M graphic systems